Description:
The RTV silicone rubber is a neutral and transparent one-component RTV silicone rubber to absorb moisture in the air at room temperature hardening. with non-toxic, non-polluting, non-corrosive, anti-aging, moisture, excellent electrical insulation and arc resistance properties, and have good adhesive properties. long-termuse in the temperature palette of-60C-200C, stable performance, especially for perfusion sealedelectronic components, play a moisture proof, sealed, shock as well as achieving stable performance of the roll.
Features:
White thixotrope elastomer. Good cold and hot tolerance. No peeling and good disassemble after long time use.
Excellent in cold and high resistance. It has great responsibility, isolation and discharge.
Since the hardening of the RTV silicone rubber-like elastic body is transparent, the necessity for a transparent optical adhesive sealing material because a certain adhesion can be used for encapsulation electronic components and small output transformer and TV industry sealed against moisture, sealing, as well as achieve stable performance seismic effects. SCR table can be used as protection, optical instruments require transparent adhesive sealing, electronics, communication equipment moisture sealing to protect the color coating, transistors and silicon diodes and protective coatings.
Silicon rubber only, other accessories demo in the picture is not included!
Specification:
Material: Silicone rubber
Dimensions: 14,3×3,9 cm/5,63×1,54 customs duty
Color: White
Quantity: 1 Pc
Note: 1. Please allow 0-1cm error due to manual measurement. Pls make sure they don’t mind before they offer.
2. because of the difference between different monitors, the image cannot monitor the actual color of the item. Thanks.
Package contains:
1 x Silicone rubber (with small package)
Usage:
After the components for general cleaning, slice nozzle sleeve, extrusion gel, glue. at room temperature 25 C,50% humidity, 24-hour hardening depth of 2-3mm. as sticky area, longer hardening adhesive thickness, the longer the storage time at room temperatur e, the better the adhesion. components such as temperature can be placed in the fully hardened layer 50 C-150 C dry into a room temperature after every four to 12 hours, and the adhesive strength can achieve better results.
Note:
1, the temperature component can be hardened at room temperature, then to 50C-100C, wet furnace for4 to 8 hours, which turns away from the low-molecular material, sufficiently hardened to ensure that the adhesive performance.
2, when the RTV silicone bubbled gum, a thickness of not much accumulation when 3mm, layered irrigation can gradually harden method that is greater the accumulation of adhesive thickness, the longer the time to heal completely. the RTV silicone rubber after use, the hose should be closed tightly, save them again. E rubber glue grease SealantElectronic equipment waterproof glue 
المراجعات
لا توجد مراجعات بعد.